AC400V-600KW Dummy Load Bank can be used in a wide variety of applications , such as
Factory testing of engine generator sets,Periodic excercising of stand-by engine generator sets
Ups system testing,Battery system testing , Load optimization in prime power applications
Factory testing of turbines , To reduce wet stacking problems .
Technical specification
| Voltage |
AC400V(3 phase 4 wire)
Line voltage 400V,Phase voltage 230V
|
| Power |
0-610KW |
| Step |
1KW,2KW,2KW,5KW, 10KW,20KW,20KW,50KW,100kW, 100kW,100kW,200kW |
| Environment temperature |
-10℃ - 50℃ |
| Cooling |
Air cooling |
| Working power supply |
AC380V, 50Hz |
Main features
Smoke Fog Protection: If there is smoke fog in the container, system cut off load automatically and give an alarm.
Fan Delivery Protection: insufficient air volume with any fan 2450m³/h, system unload automatically and give an alarm.
Fan Delivery Protection: insufficient air volume with any fan 2450m³/h, system unload automatically and give an alarm.
Overload protection with fan: when any fan cannot normally work, the load bank can unload automatically and give an alarm.
Emergency Stop: manually press the Emergency Stop switch on the panel, then load bank is in locked state, and cannot do any operation.
Protection Switch: some protection with switch, when misinformation or in special need, user can close the corresponding protection function temporarily.
Safety Monitor: through indicator lights on main interface, user can monitor system state. When system abnormally stop and protect, software interface prompt the cause immediately.
Overvoltage Protection: the input load voltage is over the safe threshold value, system unload automatically and give an alarm.
Short Circuit Protection and Over Current Protection: when short circuit, fuses in the load bank can insure to unload automatically.
Overheating Protection: temperature is over the safe threshold value, system unload automatically and give an alarm.
